Where to buy x360DNA Dual Nand Addon for Xbox 360
Team Glitchip has released it brand new product, the x360DNA Dual Nand.
Even more good Xbox 360 scene news this morning.
Team Glitchchip has informed the world recently about their new product they have released, the x360DNA a Dual NAND Add-On for those that want to hack their Xbox 360 consoles but have options to switch kernal's and best part it's all controlled with the Sync button.
Pretty cool!
Here is the Google Translated version of the new in its French website:
This addon is coupled with a chip Glitch to take advantage of a dual boot Glitch / Xbox Live, or Glitch / Dev.
Here are the functionalities of x360DNA v1:
- No break trail for the EC, or on foot to lift the nand
- Automatic management of disabling the chip x360Glitchip Glitch with v1.4 and v2.1 x360Glitchip
- No clip to con
- A real good quicksolder for simple installation and robust For Slim (FAT For a wired installation is required)
- Selection super simple via the sync button
- No button off
- No need to stay long on the second sync button during startup
- Automatic reset SMC Management
- No unnecessary integrated SPI would increase the final price
- The son and supplied pre-welded on the chip
And some exclusive functionalities:
- Function write protect the nand for the paranoid (Easily deactivated same console on)
- Function nand hot swap, to switch to nand without risk, even console turned on. (For expert)
Coupled with a x360Glitchip v2.1, you can choose to simply clean your nand nand on internal or external on the nand.
Usage of ULTRA is simple!
Console off:
Press a button once a sync on the ROL LED lights indicating you are on the external nand.
Press again once the Sync button, the LED goes out again you switch on the internal NAND.
The choice of the nand therefore comes down to pressing the sync button, then press the power button to turn the console
Console turned on:
Press about 4s on the Sync button, an LED lights on the ROL, you can release. You just switch to STDBY:
- If it is fixed is that you are on the external nand
- If it flashes is that you are on the internal nand
Simply pressing the Sync button makes you change nand hot.
Press again to exit 4s STDBY.
Please note, that in the mode STDBY the nands are not write-protected. Coming out of fashion STDBY, they are again protected.
FAQ:
- How to flash the nand external and / or the internal nand via SPI?
- Console off, simply select the nand to activate. Led off = Nand internal / external LED on = Nand
- How can my chip Glitch turns off so that my nand clean start?
- On x360Glitchip v1.4 and v2.1 x360Glitchip, one wire is needed between the chip and the addon.
- Do I get to choose where to put my nand glitchée?
- On x360Glitchip v1.4, the nand glitchée be on internal nand, nand and nand clean on the outside.
- On x360Glitchip v2.1, you can choose just over the bridge DNX. DNE = Glitch on external nand, DNI = Glitch on internal nand
- Why not put SPI?
- Simply because it is no longer useful once the change implementation and for the price. Indeed, even after an official update,
and even after evolution of the CB, the Xell will run FOREVER.
- What is the mode STDBY?
- It toggles the nand hot to use. This is useful for example to dump the nand home after an official update via xell ...
- How does the protective function of writing the nand?
- It is activated by a bridge chip on the WPE. Nands off the console are not protected. Once you switch on the console, they are write-protected.
Example preventing your children to make a formal update on nand clean.
- How to disable write protect the nand?
- In short, do not simply solder the bridge WPE. Temporarily, after the console on, allow approximately 4s press the Sync button
STDBY to switch, which will disable the protection and allow you to apply updates or other official ...
Here are the functionalities of x360DNA v1:
- No break trail for the EC, or on foot to lift the nand
- Automatic management of disabling the chip x360Glitchip Glitch with v1.4 and v2.1 x360Glitchip
- No clip to con
- A real good quicksolder for simple installation and robust For Slim (FAT For a wired installation is required)
- Selection super simple via the sync button
- No button off
- No need to stay long on the second sync button during startup
- Automatic reset SMC Management
- No unnecessary integrated SPI would increase the final price
- The son and supplied pre-welded on the chip
And some exclusive functionalities:
- Function write protect the nand for the paranoid (Easily deactivated same console on)
- Function nand hot swap, to switch to nand without risk, even console turned on. (For expert)
Coupled with a x360Glitchip v2.1, you can choose to simply clean your nand nand on internal or external on the nand.
Usage of ULTRA is simple!
Console off:
Press a button once a sync on the ROL LED lights indicating you are on the external nand.
Press again once the Sync button, the LED goes out again you switch on the internal NAND.
The choice of the nand therefore comes down to pressing the sync button, then press the power button to turn the console
Console turned on:
Press about 4s on the Sync button, an LED lights on the ROL, you can release. You just switch to STDBY:
- If it is fixed is that you are on the external nand
- If it flashes is that you are on the internal nand
Simply pressing the Sync button makes you change nand hot.
Press again to exit 4s STDBY.
Please note, that in the mode STDBY the nands are not write-protected. Coming out of fashion STDBY, they are again protected.
FAQ:
- How to flash the nand external and / or the internal nand via SPI?
- Console off, simply select the nand to activate. Led off = Nand internal / external LED on = Nand
- How can my chip Glitch turns off so that my nand clean start?
- On x360Glitchip v1.4 and v2.1 x360Glitchip, one wire is needed between the chip and the addon.
- Do I get to choose where to put my nand glitchée?
- On x360Glitchip v1.4, the nand glitchée be on internal nand, nand and nand clean on the outside.
- On x360Glitchip v2.1, you can choose just over the bridge DNX. DNE = Glitch on external nand, DNI = Glitch on internal nand
- Why not put SPI?
- Simply because it is no longer useful once the change implementation and for the price. Indeed, even after an official update,
and even after evolution of the CB, the Xell will run FOREVER.
- What is the mode STDBY?
- It toggles the nand hot to use. This is useful for example to dump the nand home after an official update via xell ...
- How does the protective function of writing the nand?
- It is activated by a bridge chip on the WPE. Nands off the console are not protected. Once you switch on the console, they are write-protected.
Example preventing your children to make a formal update on nand clean.
- How to disable write protect the nand?
- In short, do not simply solder the bridge WPE. Temporarily, after the console on, allow approximately 4s press the Sync button
STDBY to switch, which will disable the protection and allow you to apply updates or other official ...
More info in the link below.